Selection guide
Which PC Products bead do I need?
Choose by opening type, finishing system and actual fitting dimensions—not just by the product nickname.
Step by step
A practical installation overview
- 01
Single or double socket opening
Use the corresponding single or double socket bead for a normal skim finish around a standard electrical accessory.
- 02
Downlight or circular ceiling opening
Use the spotlight bead only after checking the light's specified cutout. The current PC bead is intended for approximately 57–72 mm practical openings.
- 03
Sand and cement, lime, hardwall or bonding
Choose a float and set bead. Its rear regulating edge is intended for an approximately 12 mm two-coat finish rather than a thin skim.
- 04
Extractor fan opening
Use the specialist extractor fan bead only when the fan dimensions suit the 115 mm cutout and internal clearances.
- 05
Smart control with a round mounting format
Check whether the square-to-round adapter matches the device and the standard single back box.
See it demonstrated
